Japan 高校1年 Basic Physics
Chapters: 2
1. Motion and energy
Describing motion · Forces and their effects · Mechanical energy
- Motion: Distance, Speed, Velocity, Acceleration and Graphs – An object is in motion when its position changes with time. Distance is the full path length (a scalar); displacement is the straight gap from start to finish with a direction (a vector). Speed = distance ÷ time; velocity = displacement ÷ time. Acceleration = change in velocity ÷ time. The slope of an s–t graph gives velocity, the slope of a v–t graph gives acceleration, and the area under a v–t graph gives the distance. For uniform acceleration: v = u + at, s = ut + ½at², v² = u² + 2as.
- Force and Laws of Motion – A force is a push or a pull. Balanced forces (net force zero) do not change motion; an unbalanced force changes speed or direction. Friction opposes sliding. First law: a body keeps its state of rest or uniform motion unless an unbalanced force acts (inertia; heavier bodies have more inertia). Momentum p = mv. Second law: F = ma (rate of change of momentum), 1 N = 1 kg m/s². Third law: forces come in equal and opposite pairs acting on two different bodies. For a system with no outside force, internal forces cancel and total momentum is conserved.
- Work, Energy and Power – Work is done when a force moves an object: W = F × s, measured in joules (J). Energy is the ability to do work. A moving body has kinetic energy ½mv²; a raised body has potential energy mgh. Energy is never made or destroyed, only changed from one form to another. Power is how fast work is done: P = W ÷ t, in watts. Simple machines like levers and pulleys let a small effort move a big load.
2. Physical phenomena and use of energy
Waves · Heat · Electricity · Energy and its use (incl. nuclear) · World opened by physics
- Sound – Sound is made by vibrating objects. It travels through a medium (air, water, solids) as a longitudinal wave: particles move back and forth, making crowded parts (compressions) and spread-out parts (rarefactions). Frequency (Hz) sets the pitch, amplitude sets the loudness, and speed v = f × λ. Sound cannot travel in vacuum. Humans hear 20 Hz to 20,000 Hz; below is infrasound, above is ultrasound. Reflected sound gives echoes, used and controlled in buildings.
- Thermal Expansion, Specific Heat, Calorimetry and Latent Heat – Temperature tells how hot a body is; heat is energy that flows because of a temperature difference. Most things expand when heated: ΔL = αLΔT, ΔA = βAΔT, ΔV = γVΔT, with β = 2α and γ = 3α. Water is an exception between 0 °C and 4 °C, where it shrinks on heating, so it is densest at 4 °C. The heat needed to warm a body is Q = mcΔT, where c is the specific heat; gases have two, Cp > Cv, with Cp − Cv = R per mole. In calorimetry, heat lost by hot bodies equals heat gained by cold ones. During melting or boiling the temperature stays constant and heat Q = mL goes into changing the state.
- Ohm's Law – At constant temperature, the current through a conductor is directly proportional to the potential difference across it: V = I × R. R is the resistance, measured in ohms (Ω); 1 Ω = 1 V/1 A. The V–I graph of an ohmic conductor is a straight line through the origin.
- Minerals and Energy Resources – Minerals are natural substances found in rocks. They are metallic (ferrous or non-ferrous), non-metallic, or energy minerals. Energy comes from conventional sources like coal, petroleum, natural gas and electricity, and from non-conventional sources like sun, wind, nuclear, biogas, tides and heat from the Earth. Both minerals and energy must be conserved.